Blog

Solder Paste vs. Red Glue in SMT: Process Selection and Manufacturing Trade-offs

In SMT assembly, solder paste and red glue (SMT adhesive) serve different purposes—one creates the electrical and mechanical solder joint, the other simply holds components in place. Choosing the right process—or combining both—directly affects cost, yield, and reliability. This guide compares the two processes, explains their applications and limitations, and provides selection criteria for mixed SMT/DIP assembly.
2026.11.04

Multilayer PCB Structure: How to Increase Routing Density and Performance

Multilayer PCBs stack alternating layers of copper and insulating material, using vias to connect them in three dimensions. This guide covers the basic structure of multilayer boards, four methods to increase routing density—adding layers, optimizing via design, using finer traces, and adopting high-density packaging—and the core advantages they deliver in size, speed, performance, and cost.
2026.11.03

The 2026 AI Hardware Boom: Reshaping the Global PCB Supply Chain

The AI boom is pushing power consumption past 1,000W per chip and driving the shift to Chiplets and high-speed materials. This article explores how these demands are reshaping global PCB manufacturing—from 20oz heavy copper and Any-layer HDI to high-frequency hybrid laminates—and why agile, small-to-medium batch manufacturing is becoming the backbone of global hardware innovation.
2026.11.03

Common PCBA Failure Causes: Components, Solder, Connectors, and Design

PCBA failures can stem from component defects, poor soldering, connector issues, design margins that are too tight, or harsh environmental exposure. This guide covers nine common failure causes—from component contact problems and wire damage to resonance and environmental effects—and explains how manufacturing process control and DFM review reduce risk.
2026.11.03

Common PCB Failure Cases and Root Causes: Electrical, Mechanical, and Material

PCB reliability directly affects the stability of electronic devices. This guide covers common PCB failure cases—short circuits, open circuits, signal transmission anomalies, board warpage, component detachment, substrate aging, and solder fatigue—along with their root causes in design, manufacturing, and environmental stress, plus practical prevention measures.
2026.11.02

PCB Design Output Files: A Complete Guide to Manufacturing and Assembly Data

Before a PCB can go into production, you need a complete set of output files—manufacturing data, assembly files, and documentation. This guide covers everything from Gerber and NC drill files to BOM, Pick-and-Place, STEP models, test reports, and special manufacturing notes, helping you package your files correctly for the factory.
2026.11.02

16 Essential PCB Design Principles: From Layout to Routing

A great PCB design isn't just about connectivity—it's about signal integrity, power integrity, and EMC. This guide covers 16 essential PCB design principles organized into three categories: layout strategy, stack-up and plane design, and routing rules. Each principle includes the root cause of the problem and the practical countermeasure.
2026.10.30

The 2026 Hardware Inflection Point: How AI Computing and 800V EVs Are Reshaping PCB Manufacturing

In 2026, the electronics industry is facing extreme physical challenges. AI servers are pushing power consumption past 100kW, and EVs are adopting 800V platforms. This article explores how these trends are driving extreme demands for heavy copper (up to 20oz), high-layer HDI, advanced thermal management, and high-voltage insulation—and how AnyPCBA’s manufacturing capabilities are rising to meet them.
2026.10.30

15 Common PCB Circuit Effects in Electronic Design: Causes and Mitigation

Many PCB failures aren't caused by drawing errors, but by physical effects invisible in schematics and DRC checks. This guide covers 15 common PCB circuit effects—from bridging, ripple, and crosstalk to thermal expansion, via effects, and latent defects—organized into four categories: signal transmission, EMC, environmental physics, and manufacturing reliability.
2026.10.29

Preventing PCB Warpage and Bowing During Reflow Soldering

PCB warpage and bowing are common defects during SMT reflow soldering, caused by thermal stress from mismatched CTE between copper, resin, and fiberglass. This article covers five key strategies to prevent warpage—lowering thermal stress, using high-Tg materials, increasing board thickness, optimizing board dimensions and panelization, and using reflow carriers—along with AnyPCBA's manufacturing control practices.
2026.10.27

HDI PCB Orders Explained: Definition, Differences from Standard PCBs, and Manufacturing Process

As electronics become smaller and more integrated, HDI (High Density Interconnect) PCBs have become the standard for high-end hardware. This guide explains how HDI orders are defined (1-N, 2-N, any-layer), how HDI PCBs differ from standard PCBs in routing density, via technology, and layer count, and walks through the HDI manufacturing process.
2026.10.26

PCB Stack-Up Design Principles: What Is a PCB Stack-Up?

A PCB stack-up determines signal integrity, power integrity, EMI/EMC performance, and manufacturing cost. When designing boards with four or more layers, stack-up decisions directly impact board performance and price. This guide covers stack-up fundamentals, key design principles, and how stack-up choices affect circuit performance.
2026.10.26